(area protection)industrial automation safeguard solutions SNQ 1030

1.Pefect self-checking function 2.Good anti-vibration 3.Punch protector device has good immunity 4.Durable life

1.Basic introduction

SNQ1030 seriespunch protector device , sensor section size is 53 ×35,structure compact,beautiful outlook,mainly be used in small stamping equipment, shearing equipment, machinery processing equipment, the injection molding machinery and paper cutting machinery, woodworking machinery, three-dimension garage, and other dangerous area's protection.

SNQ1030 series,direct transmission type, protective height 270mm,protective range :2 sides protection<=6000mm,3 sides<=4000mm

2.SNQ series's specificationProtection range,2 sides protection<=6000mm,3 sides<=4000mm;SpecificationSNQxx20 (xx=06, 08, 10, 12......72)SNQxx30 (xx=06, 08, 10, 12......72)SNQxx40 (xx=04, 06, 08, 10......36)SNQxx80 (xx=02, 04, 06, 08......20)Light axis pitch 20mm, 30mm, 40mm,  80mmProtection height=(xx-1)×light axis pitchSNQxx20 100,140,180,220......1420mmSNQxx30 150,210,270,330......2130mmSNQxx40 120,200,280,360......2840mmSNQxx80 80,240,400,560......1520mm

3.Working principle

The protector consists of light curtain,signal cables,controller and control cables.The light curtain can form infrard light curtain,detect the signal of passing or intercepting,and send the signal to control box that also supplies power to the light curtain.The control box processes the signal and outputs the closed or opened signal used safety relay,and then connects the control trip circuit of the press by control cable or other protective equipment to protect the workers.

4.Detailed introduction 

(1)SNQ series is based on STD series,using 1 or 2 mirrors reflecting the beams,changing the transmission.

(2)Light curtain form:Plane mirror reflect

(3)Standard configuration:

2 sides protection : Emitter/1,Mirror/1,Receiver/1,N type controller/1,Signal cable 3m/1 root,8m/1 root,Installation fittings/1 set;

3 sides protection:Emitter/1,Mirror/2,Receiver/1,N type controller/1,Signal cable 3m/1 root,8m/1 root,Installation fittings/1 set;

(4)It is allowed to choose W type controller(5)Controller:N type, inside installation,control 1 set light curtain,the power source is AC220V/110V(terminals) or DC24V; W type, outside installation,control 1 set light curtain,the power source is AC220V/110V(switch conversion) or DC24V; controller cable is equipped with standard length: N type 1.0m ,W type 2.5m(5)It can provide NPN output, at this time, we should guarantee the follow-up control circuit correspond to safety requirements and provide DC24V power source.(6)Prompts specially:If the power source need to be DC24V,the special explanation should be made on order.If the length of signal and controller cables need to lengthen,the special explanation should be made on order;

5. Application examples

 

 6.SNQ series photoelectric protection device order instructions

 

controller		N-type (built-in) *	W-type (external)	S-type (control of external double)
Control Cable		Controller to the machine electrical connection between the length: 1.0 m *; 2.5 m ; Other ___
Signal cable	Light-emitting device to the controller cable length (5) m, by    the              optical device to control the cable length (2.5) m
Installation		Steel Pipe Support *	Corner plate fixation	Word plate fixation
Width of machine tool table		(1.5) m
Travel + regulatory volume slider		(300)mm
Machine Cam controller		Mechanical cam*	Electronic cam	No cam
Optical axis pitch		20mm *	30mm	40mm
Product Type		Based on the above selection(SNB1620-N)
Notes
Notes		*Identifies the parameters for the selected

(area protection)industrial automation safeguard solutions SNQ 1030